Enabling cluster capabilities
Cluster administrators can enable cluster capabilities that were disabled prior to installation.
Cluster administrators cannot disable a cluster capability after it is enabled. |
Viewing the cluster capabilities
As a cluster administrator, you can view the capabilities by using the clusterversion
resource status.
Prerequisites
- You have installed the OpenShift CLI (
oc
).
Procedure
To view the status of the cluster capabilities, run the following command:
$ oc get clusterversion version -o jsonpath='{.spec.capabilities}{"\n"}{.status.capabilities}{"\n"}'
Example output
{"additionalEnabledCapabilities":["openshift-samples"],"baselineCapabilitySet":"None"}
{"enabledCapabilities":["openshift-samples"],"knownCapabilities":["CSISnapshot","Console","Insights","Storage","baremetal","marketplace","openshift-samples"]}
Enabling the cluster capabilities by setting baseline capability set
As a cluster administrator, you can enable the capabilities by setting baselineCapabilitySet
.
Prerequisites
- You have installed the OpenShift CLI (
oc
).
Procedure
To set the
baselineCapabilitySet
, run the following command:$ oc patch clusterversion version --type merge -p '{"spec":{"capabilities":{"baselineCapabilitySet":"vCurrent"}}}' (1)
1 For baselineCapabilitySet
you can specifyvCurrent
,v4.11
,v4.12
, orNone
.
The following table describes the baselineCapabilitySet
values.
Value | Description |
---|---|
| Specify when you want to automatically add new capabilities as they become recommended. |
| Specify when you want the capabilities recommended in OKD 4.11 and not automatically enable capabilities, which might be introduced in later versions. The capabilities recommended in OKD 4.11 are |
| Specify when you want the capabilities recommended in OKD 4.12 and not automatically enable capabilities, which might be introduced in later versions. The capabilities recommended in OKD 4.12 are |
| Specify when the other sets are too large, and you do not need any capabilities or want to fine-tune via |
Enabling the cluster capabilities by setting additional enabled capabilities
As a cluster administrator, you can enable the cluster capabilities by setting additionalEnabledCapabilities
.
Prerequisites
- You have installed the OpenShift CLI (
oc
).
Procedure
View the additional enabled capabilities by running the following command:
$ oc get clusterversion version -o jsonpath='{.spec.capabilities.additionalEnabledCapabilities}{"\n"}'
Example output
["openshift-samples"]
To set the
additionalEnabledCapabilities
, run the following command:$ oc patch clusterversion/version --type merge -p '{"spec":{"capabilities":{"additionalEnabledCapabilities":["openshift-samples", "marketplace"]}}}'
It is not possible to disable a capability which is already enabled in a cluster. The cluster version Operator (CVO) continues to reconcile the capability which is already enabled in the cluster. |
If you try to disable a capability, then CVO shows the divergent spec:
$ oc get clusterversion version -o jsonpath='{.status.conditions[?(@.type=="ImplicitlyEnabledCapabilities")]}{"\n"}'
Example output
{"lastTransitionTime":"2022-07-22T03:14:35Z","message":"The following capabilities could not be disabled: openshift-samples","reason":"CapabilitiesImplicitlyEnabled","status":"True","type":"ImplicitlyEnabledCapabilities"}
During the cluster upgrades, it is possible that a given capability could be implicitly enabled. If a resource was already running on the cluster before the upgrade, then any capabilities that is part of the resource will be enabled. For example, during a cluster upgrade, a resource that is already running on the cluster has been changed to be part of the |